Type RP Fast Evaporating Cable Cleaner
Medium & High Voltage cable preparation cleaner/degreaser
Product Features:
- Safe – Excellent alternative to brominated and chlorinated solvents.
- Versatile – Available in Pel-Pac™ towelettes or aerosol cans.
- Fast Evaporation – Evaporates quickly and leaves no residue.
- Tested – High dielectric strength of 56Kv meets IEEE 1493.
- Proven – Approved by medium voltage cable manufacturers.
Polywater® Type RP™ Rapid Power medium voltage cable cleaner evaporates quickly without the health and safety issues of other volatile cable cleaners. Type RP™ is packaged several ways to make cleaning and maintenance safer and easier.
Lint-free wipes leaves no residue
The Pel-Pac™ single wipes are lint-free and saturated with the optimal amount of solvent for the job. The RP-1L wipes easily fit into tool bags, nose bags, and splicer tool buckets. Pre-packaged wipes ensure the use of a lint-free towel, limit the solvent exposure, eliminate waste, and properly prep the cable. Using too much solvent to clean cables can result in pooling of the solvent, potentially causing tracking failure.
The RP-16 aerosol is best suited for cleaning busbars, transformer oils, switchgear, meters, electric motors, and other degreasing needs. Type RP™ contains no chemicals that are suspected, listed, or known carcinogens. Please review the RP aerosol SDS for safe use.
Lint-free wipes leaves no residue
Product/Package Notes:
Polywater® Type RP™ wipes are available in two sizes – 5″ x 8″ and 8″ x 12″ (127mm x 203mm and 203mm x 304mm). The smaller size wipes are also available in kits for convenience in staging large termination jobs or supplying tool crib bins.
Type RP™ is also available in a new aerosol can (RP-16) for high-pressure spray cleaning.
Polywater® Type RP™ Solvent
