SPY Sprayable Cable Pulling Lubricant
Sprayable Liquid Lubricant for Cable pulling or Pushing
Product Features:
- Lubricates – Reduces friction to lower pulling tension and pulling stress on wire/cable.
- Zero Mess – Dries quickly and leaves zero mess at end of receiving side of the pull, unlike traditional wax and gel pulling lubricants.
- Atomizable Liquid – Can be sprayed from pressurized sprayer or hand trigger sprayer.
- Wipe Application – Can be wiped onto small cables with a saturated cloth.
- Compatible with Most Cable Jackets* – Suitable for use on a broad variey of thermoplastic and thermoset cable jackets.
- ULC Listed – Listed product when needed for NEC and CEC installations.
* Contact American Polywater for specific recommendations on LSZH/LSHF or CSPE cable jacket types.
Polywater® SPY™ Lubricant is a concentrated liquid that can be sprayed into the duct or wiped on the cable in a thin
film. Industrial sprayers are available for automatic spraying application. Polywater®SPY™ is based on unique lubricant
chemistry and technology. Much like a paint, the lubricant thins as it is sprayed or wiped. Once on the cable or conduit
surface, it thickens to stay coated.
Polywater® SPY™ Sprayable Cable Pulling Lubricant reduces friction effectively and compares favorably with the other
high-quality Polywater® Lubricants.
Polywater® SPY™ Sprayable Cable Pulling Lubricant has been successfully tested for a variety of uses:
Polywater® SPY™ Sprayable Cable Pulling Lubricant has been successfully used for:
— Lubricating fiberglass rods for easier and longer insertions during fishing.
— Spraying holes in wood studs to reduce tension in hand-pulled Romex wire.
— Eliminating need to fish by allowing shorter runs of wire to be pushed.
— Lowering tension on traditional building wire pulling into EMT or PVC conduits.
— Pressurized spraying for no-mess underground cable installation.
Product/Package Notes:
Polywater® SPY™ comes in two grades – a regular grade and a winter grade for cold weather use in temperatures as low as – 20°F/-30°C.
The SPY-35LR is a refillable, spray trigger bottle practical for shorter wire runs.
The bulk packages of Polywater® SPY™ can be applied from a pressure sprayer (see demonstration video on right sidebar).
The SPY-D20 contains lubricant-saturated towels that coat the wires as they are pulled.
Polywater® SPY™ Lube Spray Lubricant
